Router VLAN Configuration

Router Con0 is now available
Press RETURN to get started!
Router>enable
% Incomplete command.
Router#configure terminal
% Incomplete command.
Router(config)#hostname Route_VLAN
Route_VLAN(config)#enable secret fery
Route_VLAN(config)#line console 0
Route_VLAN(config-line)#password fery
Route_VLAN(config-line)#login
Route_VLAN(config-line)#exit
Route_VLAN(config)#line vty 0 4
Route_VLAN(config-line)#password fery
Route_VLAN(config-line)#login
Route_VLAN(config-line)#exit
Route_VLAN(config)#service password-encryption
Route_VLAN(config)#interface fastethernet 0/0
Route_VLAN(config-if)#no ip address
Route_VLAN(config-if)#no shutdown
03:37:51 %LINK-3-UPDOWN: Interface Fastethernet0/0, changed state to up
03:37:51 %LINEPROTO-5-UPDOWN: Line protocol on Interface Fastethernet0/0, changed state
to up
Route_VLAN(config-if)#exit
Route_VLAN(config)#interface fastethernet 0/0.1
Route_VLAN(config-subif)#encapsulation dot1Q 1
Route_VLAN(config-subif)#ip address 172.16.10.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.2
Route_VLAN(config-subif)#encapsulation dot1Q 2
Route_VLAN(config-subif)#ip address 192.168.20.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.3
Route_VLAN(config-subif)#encapsulation dot1Q 3
Route_VLAN(config-subif)#ip address 192.168.30.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.4
Route_VLAN(config-subif)#encapsulation dot1Q 4
Route_VLAN(config-subif)#ip address 192.168.40.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.5
Route_VLAN(config-subif)#encapsulation dot1Q 5
Route_VLAN(config-subif)#ip address 192.168.50.1 255.255.255.0
Route_VLAN(config-subif)# --->CTRL+Z
Route_VLAN#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Route_VLAN#

2950 Main Switch Configuration

switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname 2950-MainSwitch
2950-MainSwitch(config)#enable secret fery
2950-MainSwitch(config)#line console 0
2950-MainSwitch(config-line)#password fery
2950-MainSwitch(config-line)#login
2950-MainSwitch(config-line)#exit
2950-MainSwitch(config)#line vty 0 15
2950-MainSwitch(config-line)#password fery
2950-MainSwitch(config-line)#login
2950-MainSwitch(config-line)#exit
2950-MainSwitch(config)#service password-encryption
2950-MainSwitch(config)#interface fastethernet 0/6
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to Router-VLAN
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/1
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to A_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/2

2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to B_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/3
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to C_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/11
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to D_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/12
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to E_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface VLAN 1
2950-MainSwitch(config-if)#ip address 172.16.10.2 255.255.255.0
2950-MainSwitch(config-if)#no shutdown
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#ip default-gateway 172.16.10.1
2950-MainSwitch(config)#vtp mode server
Device mode already VTP SERVER.
2950-MainSwitch(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
2950-MainSwitch(config)#exit
2950-MainSwitch#VLAN database
2950-MainSwitch(VLAN)#VLAN 2 name Marketing
VLAN 2 added:
Name: Marketing
2950-MainSwitch(VLAN)#VLAN 3 name Finance

VLAN 3 added:
Name: Finance
2950-MainSwitch(VLAN)#VLAN 4 name Support
VLAN 4 added:
Name: Support
2950-MainSwitch(VLAN)#VLAN 5 name Operation
VLAN 5 added:
Name: Operation
2950-MainSwitch(VLAN)#apply
2950-MainSwitch(VLAN)#exit
APPLY completed.
Exiting....
2950-MainSwitch#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
2 Marketing active
3 Finance active
4 Support active
5 Operation active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
2950-MainSwitch#

Switch A_2950 Configuration

switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname A_2950
A_2950(config)#enable secret fery
A_2950(config)#line console 0
A_2950(config-line)#password fery
A_2950(config-line)#exit
A_2950(config)#line vty 0 15
A_2950(config-line)#password fery
A_2950(config-line)#exit
A_2950(config)#service password-encryption
A_2950(config)#interface VLAN 1
A_2950(config-if)#ip address 172.16.10.3 255.255.255.0
A_2950(config-if)#no shutdown
A_2950(config-if)#exit
A_2950(config)#ip default-gateway 172.16.10.1
A_2950(config)#interface fastethernet 0/1
A_2950(config-if)#description Trunking toMainSwitch_2950
A_2950(config-if)#exit
A_2950(config)#interface fastethernet 0/5
A_2950(config-if)#switchport access VLAN 2
A_2950(config-if)#exit
A_2950(config)#interface fastethernet 0/6

A_2950(config-if)#switchport access VLAN 4
A_2950(config-if)#exit
A_2950(config)#interface fastethernet 0/7
A_2950(config-if)#switchport access VLAN 3
A_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
A_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
A_2950(config)#apply
A_2950(config)#exit
F_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
A_2950#

Switch B_2950 Configuration

switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname B_2950
B_2950(config)#enable secret fery
B_2950(config)#line console 0
B_2950(config-line)#password fery
B_2950(config-line)#exit
B_2950(config)#line vty 0 15
B_2950(config-line)#password fery
B_2950(config-line)#exit
B_2950(config)#service password-encryption
B_2950(config)#interface VLAN 1
B_2950(config-if)#ip address 172.16.10.4 255.255.255.0
B_2950(config-if)#no shutdown
B_2950(config-if)#exit
B_2950(config)#ip default-gateway 172.16.10.1
B_2950(config)#interface fastethernet 0/1
B_2950(config-if)#description Trunking toMainSwitch_2950
B_2950(config-if)#exit
B_2950(config)#interface fastethernet 0/5
B_2950(config-if)#switchport access VLAN 2
B_2950(config-if)#exit
B_2950(config)#interface fastethernet 0/6

B_2950(config-if)#switchport access VLAN 5
B_2950(config-if)#exit
B_2950(config)#interface fastethernet 0/7
B_2950(config-if)#switchport access VLAN 3
B_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
B_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
B_2950(config)#apply
B_2950(config)#exit
B_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
B_2950#